LCOM | Datalogger

LCOM | Data collectors

Description

Descripción

Description:

The LCOM (Lufft-Communicator) is an industrial PC with the Windows-CE operating system. The following interfaces are available for communication purposes: USB, CDMA modem (RS232), Partyline modem (RS232) or UMB bus (RS485). Conversion to the following standard protocols can be made in combination with the UMB technology: TLS, NTCIP, TLS over IP with GPRS (Asfinag), DGT, XML (Asfinag) or Synop (in planning). The equipment is configured and measurement data presented on the built-in 7 inch touch screen display. A service PC is therefore no longer required. Remote access is available for software uploads and data analysis on the LCOM and UMB modules over the GPRS modem.

Supplementary description:

The LCOM has an integrated SD card to store measurements.

Power supply 20…28VDC
Power consumption 10VA
Ambient temperature -30…60°C
Relative humidity <90% RH
Protection type IP20
Dimensions 230x130x50mm
USB interface USB2.0B
GPRS modem interface RS232 on Wago Cage Clamp
Partyline modem interface RS232 on Wago Cage Clamp
UMB bus interface RS485 on Wago Cage Clamp
Display size 7 inch
Display resolution 800 x 480 pixel
Storage conditions Dry, moist, wet, ice, snow/ice, critical moisture

Grip friction, measuring range 0…1 (smooth…dry)
Sampling rate, 100Hz

Ambient temperature -30…60°C
Relative humidity <95% RH